Start in the attic, with a bucket of mastic. ENERGY STAR says that in a typical house about 20 to 30 percent of the air that moves through the duct system is lost due to leaks, holes and poorly connected ducts. That is conditioned air you paid for, delivered to a space nobody lives in.
Five signs, straight from ENERGY STAR
- High utility bills in both summer and winter.
- Rooms that are difficult to heat and cool.
- Stuffy rooms that never seem to feel comfortable.
- Ducts located in an attic, crawlspace or garage.
- Tangled or kinked flexible ducts.
The fourth one describes most Texas houses. Ducts in a summer attic are running through the hottest place on the property, so every leak on the supply side dumps cold air there and every leak on the return side pulls attic air into the system.
What to seal with
Use mastic sealant, which is a thick paste you brush on, or metal-backed foil tape. ENERGY STAR is firm on the third option: never use duct tape, as it is not long-lasting. The cloth-backed roll in everyone's garage dries out and lets go in attic heat. The name is a historical accident.
Where to start
- The ducts you can reach in unconditioned space. ENERGY STAR says to focus first on ducts that run through the attic, crawlspace, unheated basement or garage. Seal the seams and connections, then insulate those runs.
- The connections at the air handler. The joints where the supply and return plenums meet the unit move the most air and are often the worst.
- Registers and grilles. Make sure the connections at vents and registers are well sealed where they meet the floors, walls and ceiling.
- Kinks. Straighten crushed or kinked flex duct and support it so it does not sag. No sealant fixes a duct that is pinched shut.
What it is worth
ENERGY STAR says sealing and insulating ducts can improve the efficiency of a heating and cooling system by as much as 20 percent, and sometimes much more. On the comfort side, the room at the end of the longest run is usually where you notice it first.
It also changes the arithmetic on new equipment. If a contractor is proposing a bigger unit because the house "never keeps up", ask whether anyone has checked the ducts. A leaky system can make right-sized equipment look too small. See our sizing guide.
Doing it yourself, and when not to
ENERGY STAR notes that some homeowners take on duct sealing as a do-it-yourself project, and for exposed attic runs that is reasonable work with a brush, a headlamp and old clothes. Go up early in the day. Stay on the joists.
Call a contractor when the ducts are buried in walls or between floors, when you have gas appliances in the house and are making big changes to how air moves, or when you want the leakage measured before and after. In Texas, TDLR requires a license of contractors who install, repair or maintain heating and cooling systems, so ask any company quoting this work for its license number.